Menu
Rfid Tag reader for EV3 and NXT with tag kit
Rfid Tag reader for EV3 and NXT with tag kit
Fingerprint Sensor for NXT and EV3
Fingerprint Sensor for NXT and EV3
8x8 LED Matrix interface for NXT and EV3
8x8 LED Matrix interface for NXT and EV3
Track Lines, Colored Objects, Faces, Eyes and more! Capture Videos & pictures to microSD card autonomously!
Track Lines, Colored Objects, Faces, Eyes and more! Capture Videos & pictures to microSD card autonomously!
This device combines Acceleration Sensor, Compass and 3-axis digital Gyro in single package. It is configurable to different sensitivity levels of gravity, help you determine tilt, acceleration, magnetic heading and Gyro values in various intensities and 3 axes.
This device combines Acceleration Sensor, Compass and 3-axis digital Gyro in single package. It is configurable to different sensitivity levels of gravity,...
With this multiplexer, you will be able to connect two additional motors to your NXT/EV3. Connect NXT Motors and/or EV3 Motors Compact, Easy to Integrate Design Easy to Program Requires external battery
With this multiplexer, you will be able to connect two additional motors to your NXT/EV3. Connect NXT Motors and/or EV3 Motors Compact, Easy to Integrate...
Connect upto 3 sensors on a single sensor port Works with NXT or EV3. Connect any of the new LEGO EV3 sensors. High speed polling architecture for high performance robots.
Connect upto 3 sensors on a single sensor port Works with NXT or EV3. Connect any of the new LEGO EV3 sensors. High speed polling architecture for high...
Suitable for obstacle detection at two distance ranges Detect obstacles in front-left, front-right or straight ahead. Simple to use interface.
Suitable for obstacle detection at two distance ranges Detect obstacles in front-left, front-right or straight ahead. Simple to use interface.
Includes a PSP-Nx-v4 along with a 2.4GHZ RF Wireless Controller.
Includes a PSP-Nx-v4 along with a 2.4GHZ RF Wireless Controller.
Use this sensor to detect a line. Array of 8 sensors Digital I2C interface for NXT/EV3 Write your own PID controller or line follower programs
Use this sensor to detect a line. Array of 8 sensors Digital I2C interface for NXT/EV3 Write your own PID controller or line follower programs
Measure ambient temperature as well as temperature of surrounding devices. Non-contact Resolution: 0.1 degrees Returns values in Celcius and Fahrenheit EV3/NXT Compatible Connector Programming blocks available for EV3 or NXT
Measure ambient temperature as well as temperature of surrounding devices. Non-contact Resolution: 0.1 degrees Returns values in Celcius and Fahrenheit...
Uses Digital Interface High resolution readings in millimeters Range: 3cm to 200cm 100% backward compatible (Works seamlessly with previous Dist-Nx models software and programs).
Uses Digital Interface High resolution readings in millimeters Range: 3cm to 200cm 100% backward compatible (Works seamlessly with previous Dist-Nx models...
This is an array of 8 sensors with controlled light source, returning you 8 discrete values of the sensor readings. Your program can then decide if you wish to follow line with it or do something else.
This is an array of 8 sensors with controlled light source, returning you 8 discrete values of the sensor readings. Your program can then decide if you wish...
Control your NXT or EV3 robot using a Sony PlayStation 2 Compatible Controller/joystick.
Control your NXT or EV3 robot using a Sony PlayStation 2 Compatible Controller/joystick.
Connect Grove Sensors to your EV3 or NXT.
Connect Grove Sensors to your EV3 or NXT.
This ESC can control upto 8 RC servos.
This ESC can control upto 8 RC servos.
Control your NXT or EV3 robot using a Sony PlayStation 2 Compatible Controller/joystick. This is a PSP-Nx-v4 with Infrared Referee Signal Receiver.Send Referee Signals as:Game Start Autonomous Mode Begin Teleop Mode Begin Game End
Control your NXT or EV3 robot using a Sony PlayStation 2 Compatible Controller/joystick. This is a PSP-Nx-v4 with Infrared Referee Signal Receiver.Send...
Includes a PSP-Nx-v4-REF (with Referee Signal Receiver) along with a 2.4GHZ RF Wireless Controller.
Includes a PSP-Nx-v4-REF (with Referee Signal Receiver) along with a 2.4GHZ RF Wireless Controller.
Measure voltage of your electronic device. Upto: 26 volts Resolution: 1 milli-volt
Measure voltage of your electronic device. Upto: 26 volts Resolution: 1 milli-volt
Measure current of your electronic device. Upto: 12.5 amps Resolution: 1 milli-amps
Measure current of your electronic device. Upto: 12.5 amps Resolution: 1 milli-amps
This kit contains a very compact, light duty servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT/EV3 contraptions. The kit comes with mounting instructions.
This kit contains a very compact, light duty servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT/EV3 contraptions....
Control standard WS2812B RGB LED light strip from your EV3 brick. Kit includes:EV3Lights controller .5 Meter RGB LED strip Can control each LED individually
Control standard WS2812B RGB LED light strip from your EV3 brick. Kit includes:EV3Lights controller .5 Meter RGB LED strip Can control each LED...
This kit is designed to mount a Grove Sensor on NXT/EV3 Robot.
This kit is designed to mount a Grove Sensor on NXT/EV3 Robot.
Need to access Operating system Console of your EV3 for hacking?Use this device to access the Linux console.
Need to access Operating system Console of your EV3 for hacking?Use this device to access the Linux console.
This Port Splitter allows you to split a NXT port and connect upto 3 I2C compliant sensors to single NXT Port.
This Port Splitter allows you to split a NXT port and connect upto 3 I2C compliant sensors to single NXT Port.
Ideal for use in high efficiency operation. Each pack contains 2 bearing mounts. Includes ball bearings.
Ideal for use in high efficiency operation. Each pack contains 2 bearing mounts. Includes ball bearings.
This battery holder is designed for use with NXTServo or MTRMX-Nx. It has NXT compatible mounting holes to integrate it into your NXT contraption easily.
This battery holder is designed for use with NXTServo or MTRMX-Nx. It has NXT compatible mounting holes to integrate it into your NXT contraption easily.
This battery holder is designed to hold 6 AA batteries. It has LEGO NXT/EV3 compatible mounting to integrate it into your LEGO contraption easily.
This battery holder is designed to hold 6 AA batteries. It has LEGO NXT/EV3 compatible mounting to integrate it into your LEGO contraption easily.
This kit is designed to connect NXT or EV3 to breadboard. It contains a PCB, NXT/EV3 compatible connector and headers to attach. Includes Assembly Instructions. (Requires soldering).
This kit is designed to connect NXT or EV3 to breadboard. It contains a PCB, NXT/EV3 compatible connector and headers to attach. Includes Assembly...
Control Pneumatic valves with EV3 (or NXT). Includes all the required hardware. Includes Assembly instructions. (this kit requires NXTServo-v3 or similar servo controller).
Control Pneumatic valves with EV3 (or NXT). Includes all the required hardware. Includes Assembly instructions. (this kit requires NXTServo-v3 or similar...
Comes with servo and horn mounting hardware for NXT and installation instructions. This kit is designed to mount following Hitec Servos on NXT or EV3: HS-422 (90° or 180° or continuous rotation) HS-HS-425BB (90° or 180° or continuous rotation) HSR-1422CR (57 oz.in.) Continuous Rotation Standard Servo HS-485HB This kit does not include servos.
Comes with servo and horn mounting hardware for NXT and installation instructions. This kit is designed to mount following Hitec Servos on NXT or EV3: HS-422...
You can use this device to send Numeric input to your NXT program. Digital Sensor Interface Attach to Sensor Port on NXT Input 0 to 9, # and *
You can use this device to send Numeric input to your NXT program. Digital Sensor Interface Attach to Sensor Port on NXT Input 0 to 9, # and *
Use this Extender to connect two NXT Cables to increase effective length.
Use this Extender to connect two NXT Cables to increase effective length.
This lens is designed to permit Infrared light on to the CMOS chip of NXTCam or Pixy. If you plan to use NXTCam or Pixy for IR light detection (such as Roboball, IR soccer ball, candle or flame), use this lens for better results.
This lens is designed to permit Infrared light on to the CMOS chip of NXTCam or Pixy. If you plan to use NXTCam or Pixy for IR light detection (such as...
This ball Caster comes with two balls, one plastic and one metal. You can use one of the balls based on your intended application. Ball dia: 1/4"
This ball Caster comes with two balls, one plastic and one metal. You can use one of the balls based on your intended application. Ball dia: 1/4"
This is a Extender kit for NXT/EV3 Cables. You can use this Extender to connect two Cables to increase effective length.
This is a Extender kit for NXT/EV3 Cables. You can use this Extender to connect two Cables to increase effective length.
1 cable up to 1 meter in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying by Paypal, make a note in Paypal comments. If you are paying by other method, send us an e-mail). Note, custom cut cables are not returnable.
1 cable up to 1 meter in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying by...
To detect small or far objects Focal length: 8mm Field of view: 38.5 degrees With Infrared Filter For use in indoor or natural light setting
To detect small or far objects Focal length: 8mm Field of view: 38.5 degrees With Infrared Filter For use in indoor or natural light setting
1 cable between 1 and 2 meters in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying by Paypal, make a note in Paypal comments. If you are paying by other method, send us an e-mail), Note, custom cut cables are not returnable.
1 cable between 1 and 2 meters in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying...
1 cable between 2 and 3 meters in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying by Paypal, make a note in Paypal comments. If you are paying by other method, send us an e-mail), Note, custom cut cables are not returnable.
1 cable between 2 and 3 meters in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying...
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 3 cables 20 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 3 cables 20 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 4 most usable sizes - 1 cable: 20 cm (8 inches), 2 cables: 35 cm (14 inches), 1 cable: 50 cm (20 inches)
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 4 most usable sizes - 1 cable: 20 cm (8 inches), 2 cables: 35 cm...
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 3 cables 10 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 3 cables 10 cm each
This controller is designed to be a compact controller for PF Motors using IR communications through PF receivers. The Red spacer bricks and the PF IR receiver seen in the picture are not part of this controller.
This controller is designed to be a compact controller for PF Motors using IR communications through PF receivers. The Red spacer bricks and the PF IR...
Short Length Flexi-Cables for NXT/EV3. Ribbon like thin and flexible, Comes with NXT Compatible Phone jack connectors, Pack of 4 short cables - 2 cables: 10 cm (4 inches), 2 cables: 20 cm (8 inches)
Short Length Flexi-Cables for NXT/EV3. Ribbon like thin and flexible, Comes with NXT Compatible Phone jack connectors, Pack of 4 short cables - 2 cables: 10...
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 25 cables 10 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 25 cables 10 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 25 cables 35 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 25 cables 35 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 25 cables 20 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 25 cables 20 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 3 cables 35 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 3 cables 35 cm each
If you are using a host controller other than NXT, this cable can be used to connect NXT Sensors to your controller board.
If you are using a host controller other than NXT, this cable can be used to connect NXT Sensors to your controller board.
This lens is designed to block Infrared light. For use in indoor or natural light setting. This is also the factory default lens on NXTCam-v4.
This lens is designed to block Infrared light. For use in indoor or natural light setting. This is also the factory default lens on NXTCam-v4.
This sensor measures pressures produced by LEGO Pneumatics systems and lot more!Pressure range: 0 to 58 PSI Measure Absolute Pressure, Relative pressure (change in pressure) Works with NXT-G, RobotC, BricxXX/NXC. Also, works with Data Logging Tool of NXT-G Edu version.
This sensor measures pressures produced by LEGO Pneumatics systems and lot more!Pressure range: 0 to 58 PSI Measure Absolute Pressure, Relative pressure...
This kit contains a medium duty 47 grams servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT or EV3 contraptions. The kit comes with mounting instructions.
This kit contains a medium duty 47 grams servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT or EV3 contraptions....
You will need a special tool to crimp these plugs. (You may also need Tester for NXT/EV3 Cables)
You will need a special tool to crimp these plugs. (You may also need Tester for NXT/EV3 Cables)
You will need a special tool to crimp these plugs. (You may also need Tester for NXT/EV3 Cables)
You will need a special tool to crimp these plugs. (You may also need Tester for NXT/EV3 Cables)
NXT/EV3 Compatible (female) Sockets - 5 pack
NXT/EV3 Compatible (female) Sockets - 5 pack
NXT/EV3 Compatible (female) Sockets - 110 pack
NXT/EV3 Compatible (female) Sockets - 110 pack
Use these pins on your device to connect a LiPo battery. Works with all models of: NXTMMX, NXTServo, MTRMX-Nx Pack contains 2 pairs of pins
Use these pins on your device to connect a LiPo battery. Works with all models of: NXTMMX, NXTServo, MTRMX-Nx Pack contains 2 pairs of pins
Verify your cables for connectivity or faults using this tester. Particularly useful when you are crimping your own cables or reusing old cables.
Verify your cables for connectivity or faults using this tester. Particularly useful when you are crimping your own cables or reusing old cables.
This kit contains a medium duty continuous rotation 47 grams servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT or EV3 contraptions. The kit comes with mounting instructions.
This kit contains a medium duty continuous rotation 47 grams servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT or...
Use this Caster on NXT or EV3 Robot. Includes marble Marble diameter: 16mm LEGO parts not included
Use this Caster on NXT or EV3 Robot. Includes marble Marble diameter: 16mm LEGO parts not included
1 cable between 3 and 4 meters in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying by Paypal, make a note in Paypal comments. If you are paying by other method, send us an e-mail), Note, custom cut cables are not returnable.
1 cable between 3 and 4 meters in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying...
cable by meter length, No connectors attached. max continuous length of 25 meters. Note, custom cut cables are not returnable.
cable by meter length, No connectors attached. max continuous length of 25 meters. Note, custom cut cables are not returnable.
Control standard WS2812B RGB LED light strip from your EV3 brick. Kit includes:EV3Lights controller
Control standard WS2812B RGB LED light strip from your EV3 brick. Kit includes:EV3Lights controller
Caster CAD files. Free Download. Print your own caster!
Caster CAD files. Free Download. Print your own caster!
This is a tilt compensated Compass designed for Mindstorms NXT kit. Built in Acceleration sensor helps provide superior performance even in rough environment.
This is a tilt compensated Compass designed for Mindstorms NXT kit. Built in Acceleration sensor helps provide superior performance even in rough environment.
Easy-to-use design. Provides readings in degrees.
Easy-to-use design. Provides readings in degrees.
This controller is designed to control PF motors from NXT or EV3. Provides high precision speed and rotation control. Easy-to-use design.
This controller is designed to control PF motors from NXT or EV3. Provides high precision speed and rotation control. Easy-to-use design.
This is a 3 axis, multi-sensitivity accelerometer designed for Mindstorms NXT kit.
This is a 3 axis, multi-sensitivity accelerometer designed for Mindstorms NXT kit.
Uses Digital Interface High resolution readings in millimeters Range: 10cm to 80cm
Uses Digital Interface High resolution readings in millimeters Range: 10cm to 80cm
This device combines Acceleration Sensor and Compass on single rigid package. It is configurable to different sensitivity levels of gravity, help you determine tilt and acceleration and magnetic heading in various intensities and 3 axes.
This device combines Acceleration Sensor and Compass on single rigid package. It is configurable to different sensitivity levels of gravity, help you...
This kit contains a very compact, light duty servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT/EV3 contraptions. The kit comes with mounting instructions. This item is discontinued, and it is replaced by SMK902MG (A kit with metal gear servos)
This kit contains a very compact, light duty servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT/EV3 contraptions....
Comes with servo mounting hardware and horn mounting hardware for NXT and installation instructions. This kit is designed to mount following Hitec Servos on NXT or EV3: HS-311 (90° or 180° or continuous rotation) HS-322HD (90° or 180° or continuous rotation) This kit does not include servos.
Comes with servo mounting hardware and horn mounting hardware for NXT and installation instructions. This kit is designed to mount following Hitec Servos on...
Control Pneumatic valves with EV3 (or NXT). Includes all the required hardware. Includes Assembly instructions. (this kit requires NXTServo-v2 or similar servo controller). This item is discontinued and replaced by PSMV-MG-V (A kit with metal gear servos)
Control Pneumatic valves with EV3 (or NXT). Includes all the required hardware. Includes Assembly instructions. (this kit requires NXTServo-v2 or similar...
Using this Relay Driver, you can control up to 2 Relays from your NXT or EV3.
Using this Relay Driver, you can control up to 2 Relays from your NXT or EV3.
This vision subsystem connects to NXT or EV3 on a standard sensor port, and tracks upto 8 colored objects or Line. It reports coordinates of each object to Host. Can also be connected to a PC on USB port.
This vision subsystem connects to NXT or EV3 on a standard sensor port, and tracks upto 8 colored objects or Line. It reports coordinates of each object to...
Need to connect new SPIKE Prime sensors to your EV3?
Need to connect new SPIKE Prime sensors to your EV3?
Suitable for measuring fluid temperature. Measures ±0.5°C (Maximum) From −20°C to 100°C. Compact Sealed stainless tube design. Ultra low power consumption (<1mA)
Suitable for measuring fluid temperature. Measures ±0.5°C (Maximum) From −20°C to 100°C. Compact Sealed stainless tube design. Ultra low power consumption...