This kit is designed to connect NXT or EV3 to breadboard. It contains a PCB, NXT/EV3 compatible connector and headers to attach. Includes Assembly Instructions. (Requires soldering).
This kit is designed to connect NXT or EV3 to breadboard. It contains a PCB, NXT/EV3 compatible connector and headers to attach. Includes Assembly...
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 3 cables 35 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 3 cables 35 cm each
1 cable up to 1 meter in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying by Paypal, make a note in Paypal comments. If you are paying by other method, send us an e-mail). Note, custom cut cables are not returnable.
1 cable up to 1 meter in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying by...
cable by meter length, No connectors attached. max continuous length of 25 meters. Note, custom cut cables are not returnable.
cable by meter length, No connectors attached. max continuous length of 25 meters. Note, custom cut cables are not returnable.
Connect upto 3 sensors on a single sensor port Works with NXT or EV3. Connect any of the new LEGO EV3 sensors. High speed polling architecture for high performance robots.
Connect upto 3 sensors on a single sensor port Works with NXT or EV3. Connect any of the new LEGO EV3 sensors. High speed polling architecture for high...
1 cable between 1 and 2 meters in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying by Paypal, make a note in Paypal comments. If you are paying by other method, send us an e-mail), Note, custom cut cables are not returnable.
1 cable between 1 and 2 meters in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying...
This device combines Acceleration Sensor, Compass and 3-axis digital Gyro in single package. It is configurable to different sensitivity levels of gravity, help you determine tilt, acceleration, magnetic heading and Gyro values in various intensities and 3 axes.
This device combines Acceleration Sensor, Compass and 3-axis digital Gyro in single package. It is configurable to different sensitivity levels of gravity,...
Use this Extender to connect two NXT Cables to increase effective length.
Use this Extender to connect two NXT Cables to increase effective length.
You will need a special tool to crimp these plugs. (You may also need Tester for NXT/EV3 Cables)
You will need a special tool to crimp these plugs. (You may also need Tester for NXT/EV3 Cables)
Suitable for obstacle detection at two distance ranges Detect obstacles in front-left, front-right or straight ahead. Simple to use interface.
Suitable for obstacle detection at two distance ranges Detect obstacles in front-left, front-right or straight ahead. Simple to use interface.
Use this sensor to detect a line. Array of 8 sensors Digital I2C interface for NXT/EV3 Write your own PID controller or line follower programs
Use this sensor to detect a line. Array of 8 sensors Digital I2C interface for NXT/EV3 Write your own PID controller or line follower programs
With this multiplexer, you will be able to connect two additional motors to your NXT/EV3. Connect NXT Motors and/or EV3 Motors Compact, Easy to Integrate Design Easy to Program Requires external battery
With this multiplexer, you will be able to connect two additional motors to your NXT/EV3. Connect NXT Motors and/or EV3 Motors Compact, Easy to Integrate...
NXT/EV3 Compatible (female) Sockets - 5 pack
NXT/EV3 Compatible (female) Sockets - 5 pack
This Port Splitter allows you to split a NXT port and connect upto 3 I2C compliant sensors to single NXT Port.
This Port Splitter allows you to split a NXT port and connect upto 3 I2C compliant sensors to single NXT Port.
Includes a PSP-Nx-v4 along with a 2.4GHZ RF Wireless Controller.
Includes a PSP-Nx-v4 along with a 2.4GHZ RF Wireless Controller.
1 cable between 2 and 3 meters in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying by Paypal, make a note in Paypal comments. If you are paying by other method, send us an e-mail), Note, custom cut cables are not returnable.
1 cable between 2 and 3 meters in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying...
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 3 cables 20 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 3 cables 20 cm each
This battery holder is designed to hold 6 AA batteries. It has LEGO NXT/EV3 compatible mounting to integrate it into your LEGO contraption easily.
This battery holder is designed to hold 6 AA batteries. It has LEGO NXT/EV3 compatible mounting to integrate it into your LEGO contraption easily.
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 4 most usable sizes - 1 cable: 20 cm (8 inches), 2 cables: 35 cm (14 inches), 1 cable: 50 cm (20 inches)
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 4 most usable sizes - 1 cable: 20 cm (8 inches), 2 cables: 35 cm...
Make LEGO Robot with Raspberry Pi Brains! Works with Raspberry Pi A+, B+, Pi 2 & Pi 3,Pi 4 Python3 ready
Make LEGO Robot with Raspberry Pi Brains! Works with Raspberry Pi A+, B+, Pi 2 & Pi 3,Pi 4 Python3 ready
This ESC can control upto 8 RC servos.
This ESC can control upto 8 RC servos.
Short Length Flexi-Cables for NXT/EV3. Ribbon like thin and flexible, Comes with NXT Compatible Phone jack connectors, Pack of 4 short cables - 2 cables: 10 cm (4 inches), 2 cables: 20 cm (8 inches)
Short Length Flexi-Cables for NXT/EV3. Ribbon like thin and flexible, Comes with NXT Compatible Phone jack connectors, Pack of 4 short cables - 2 cables: 10...
This is an array of 8 sensors with controlled light source, returning you 8 discrete values of the sensor readings. Your program can then decide if you wish to follow line with it or do something else.
This is an array of 8 sensors with controlled light source, returning you 8 discrete values of the sensor readings. Your program can then decide if you wish...
Pi-Pan provides Pan and tilt movements for your Raspberry Pi Camera.Kit Includes: Plastic mounts for Camera and Servos Servo controller board 2 Metal Gear Servos and screws
Pi-Pan provides Pan and tilt movements for your Raspberry Pi Camera.Kit Includes: Plastic mounts for Camera and Servos Servo controller board 2 Metal Gear...
This kit is designed to mount a Grove Sensor on NXT/EV3 Robot.
This kit is designed to mount a Grove Sensor on NXT/EV3 Robot.
Need to connect new SPIKE Prime sensors to your EV3?
Need to connect new SPIKE Prime sensors to your EV3?
If you are using a host controller other than NXT, this cable can be used to connect NXT Sensors to your controller board.
If you are using a host controller other than NXT, this cable can be used to connect NXT Sensors to your controller board.
Use this Splitter to connect multiple CAN Devices on your CAN Network.
Use this Splitter to connect multiple CAN Devices on your CAN Network.
Connect Grove Sensors to your EV3 or NXT.
Connect Grove Sensors to your EV3 or NXT.
Make stunning LEGO Robot with Raspberry Pi Brains! This kit includes everything you need, just add your LEGO parts and you are ready roll! Includes PiStorms Base Kit 8GB SD Card with Ready to use PiStorms Image Raspberry Pi™ 3 Model B Single Board Computer
Make stunning LEGO Robot with Raspberry Pi Brains! This kit includes everything you need, just add your LEGO parts and you are ready roll! Includes PiStorms...
EVShield attaches directly to an Arduino and allows you to connect upto 4 NXT or EV3 motors, and 4 NXT or EV3 Sensors, and program for them through Arduino sketch. You can attach upto 6 RC Servo motors to EVShield. It has headers on top to attach existing Arduino shields.
EVShield attaches directly to an Arduino and allows you to connect upto 4 NXT or EV3 motors, and 4 NXT or EV3 Sensors, and program for them through Arduino...
This is a Extender kit for NXT/EV3 Cables. You can use this Extender to connect two Cables to increase effective length.
This is a Extender kit for NXT/EV3 Cables. You can use this Extender to connect two Cables to increase effective length.
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 3 cables 10 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 3 cables 10 cm each
Control Pneumatic valves with EV3 (or NXT). Includes all the required hardware. Includes Assembly instructions. (this kit requires NXTServo-v3 or similar servo controller).
Control Pneumatic valves with EV3 (or NXT). Includes all the required hardware. Includes Assembly instructions. (this kit requires NXTServo-v3 or similar...
NXT/EV3 Compatible (female) Sockets - 110 pack
NXT/EV3 Compatible (female) Sockets - 110 pack
Measure ambient temperature as well as temperature of surrounding devices. Non-contact Resolution: 0.1 degrees Returns values in Celcius and Fahrenheit EV3/NXT Compatible Connector Programming blocks available for EV3 or NXT
Measure ambient temperature as well as temperature of surrounding devices. Non-contact Resolution: 0.1 degrees Returns values in Celcius and Fahrenheit...
You will need a special tool to crimp these plugs. (You may also need Tester for NXT/EV3 Cables)
You will need a special tool to crimp these plugs. (You may also need Tester for NXT/EV3 Cables)
This vision subsystem connects to NXT or EV3 on a standard sensor port, and tracks upto 8 colored objects or Line. It reports coordinates of each object to Host. Can also be connected to a PC on USB port.
This vision subsystem connects to NXT or EV3 on a standard sensor port, and tracks upto 8 colored objects or Line. It reports coordinates of each object to...
This kit contains a very compact, light duty servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT/EV3 contraptions. The kit comes with mounting instructions.
This kit contains a very compact, light duty servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT/EV3 contraptions....
Make LEGO Robot with Raspberry Pi Brains! Works with Raspberry Pi A+, B, Pi 2 & Pi 3, Pi 4 Python 3 ready Includes PiStorms-v2 Base Kit 8GB SD Card with Ready to use PiStorms Image
Make LEGO Robot with Raspberry Pi Brains! Works with Raspberry Pi A+, B, Pi 2 & Pi 3, Pi 4 Python 3 ready Includes PiStorms-v2 Base Kit 8GB SD Card with...
Control your NXT or EV3 robot using a Sony PlayStation 2 Compatible Controller/joystick.
Control your NXT or EV3 robot using a Sony PlayStation 2 Compatible Controller/joystick.
PiServoController can connect up to 6 servos to your Raspberry Pi. Provides Signal Buffering Provides Power Stabilization Works with all Models of Pi
PiServoController can connect up to 6 servos to your Raspberry Pi. Provides Signal Buffering Provides Power Stabilization Works with all Models of Pi
Rechargeable Battery Pack for use with PiStorms.Battery Capacity: 1500 mAH Includes a charging adapter.
Rechargeable Battery Pack for use with PiStorms.Battery Capacity: 1500 mAH Includes a charging adapter.
Caster CAD files. Free Download. Print your own caster!
Caster CAD files. Free Download. Print your own caster!
This controller is designed to control PF motors from NXT or EV3. Provides high precision speed and rotation control. Easy-to-use design.
This controller is designed to control PF motors from NXT or EV3. Provides high precision speed and rotation control. Easy-to-use design.
Ideal for use in high efficiency operation. Each pack contains 2 bearing mounts. Includes ball bearings.
Ideal for use in high efficiency operation. Each pack contains 2 bearing mounts. Includes ball bearings.
Uses Digital Interface High resolution readings in millimeters Range: 3cm to 200cm 100% backward compatible (Works seamlessly with previous Dist-Nx models software and programs).
Uses Digital Interface High resolution readings in millimeters Range: 3cm to 200cm 100% backward compatible (Works seamlessly with previous Dist-Nx models...
This sensor measures pressures produced by LEGO Pneumatics systems and lot more!Pressure range: 0 to 58 PSI Measure Absolute Pressure, Relative pressure (change in pressure) Works with NXT-G, RobotC, BricxXX/NXC. Also, works with Data Logging Tool of NXT-G Edu version.
This sensor measures pressures produced by LEGO Pneumatics systems and lot more!Pressure range: 0 to 58 PSI Measure Absolute Pressure, Relative pressure...
Use this Caster on NXT or EV3 Robot. Includes marble Marble diameter: 16mm LEGO parts not included
Use this Caster on NXT or EV3 Robot. Includes marble Marble diameter: 16mm LEGO parts not included
2.2 inch 320x240 TFT Color Display 5 Position Navigation Switch Integrated with EVShield library for Programming
2.2 inch 320x240 TFT Color Display 5 Position Navigation Switch Integrated with EVShield library for Programming
Pi-Light fits on Pi-Pan, in front of Pi-Camera to provide light for Pi-Camera. Works with all Models of RPi. (Includes a connecting cable)
Pi-Light fits on Pi-Pan, in front of Pi-Camera to provide light for Pi-Camera. Works with all Models of RPi. (Includes a connecting cable)
Get Pi-Pan Kit with PiLight for your Raspberry Pi Camera. Compatible with all models of Pi.
Get Pi-Pan Kit with PiLight for your Raspberry Pi Camera. Compatible with all models of Pi.
Easy-to-use design. Provides readings in degrees.
Easy-to-use design. Provides readings in degrees.
Male to Female Jumper cables for I2C communication. 4 Core cables Pack of 2 Length: 150mm each Works with all Models of Pi
Male to Female Jumper cables for I2C communication. 4 Core cables Pack of 2 Length: 150mm each Works with all Models of Pi
PWM Cable (Female to Female - 20cm)
PWM Cable (Female to Female - 20cm)
Comes with servo mounting hardware and horn mounting hardware for NXT and installation instructions. This kit is designed to mount following Hitec Servos on NXT or EV3: HS-311 (90° or 180° or continuous rotation) HS-322HD (90° or 180° or continuous rotation) This kit does not include servos.
Comes with servo mounting hardware and horn mounting hardware for NXT and installation instructions. This kit is designed to mount following Hitec Servos on...
This controller is designed to be a compact controller for PF Motors using IR communications through PF receivers. The Red spacer bricks and the PF IR receiver seen in the picture are not part of this controller.
This controller is designed to be a compact controller for PF Motors using IR communications through PF receivers. The Red spacer bricks and the PF IR...
This kit contains a medium duty continuous rotation 47 grams servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT or EV3 contraptions. The kit comes with mounting instructions.
This kit contains a medium duty continuous rotation 47 grams servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT or...
This kit is designed to connect SPIKE Prime Ultrasonic sensor cable to breadboard. It contains a PCB, pins headers, jumpers and screws. Includes Assembly Instructions. (Requires soldering).
This kit is designed to connect SPIKE Prime Ultrasonic sensor cable to breadboard. It contains a PCB, pins headers, jumpers and screws. Includes Assembly...
To detect small or far objects Focal length: 8mm Field of view: 38.5 degrees With Infrared Filter For use in indoor or natural light setting
To detect small or far objects Focal length: 8mm Field of view: 38.5 degrees With Infrared Filter For use in indoor or natural light setting
Camera Mount for PiStorms - CAD files. Free Download. Customize the Frame to your needs and print on a 3D printer.
Camera Mount for PiStorms - CAD files. Free Download. Customize the Frame to your needs and print on a 3D printer.
This kit contains a medium duty 47 grams servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT or EV3 contraptions. The kit comes with mounting instructions.
This kit contains a medium duty 47 grams servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT or EV3 contraptions....
Illuminate your subjects in darkness!! Use this light on your NoIR Pi Camera to capture images in dark. Contains 2 IR LEDs Micro-USB socket for power input Works with all Models of Pi
Illuminate your subjects in darkness!! Use this light on your NoIR Pi Camera to capture images in dark. Contains 2 IR LEDs Micro-USB socket for power input...
Use these mounts to affix your PiCamera. Includes screws to mount camera Several mount configurations Can be mounted on a RC Servo
Use these mounts to affix your PiCamera. Includes screws to mount camera Several mount configurations Can be mounted on a RC Servo
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 25 cables 20 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 25 cables 20 cm each
Uses Digital Interface High resolution readings in millimeters Range: 10cm to 80cm
Uses Digital Interface High resolution readings in millimeters Range: 10cm to 80cm
PWM Cable (Female to Female - 50cm)
PWM Cable (Female to Female - 50cm)
This battery holder is designed to hold 6 AA batteries.
This battery holder is designed to hold 6 AA batteries.
This ball Caster comes with two balls, one plastic and one metal. You can use one of the balls based on your intended application. Ball dia: 1/4"
This ball Caster comes with two balls, one plastic and one metal. You can use one of the balls based on your intended application. Ball dia: 1/4"
Need to access Operating system Console of your EV3 for hacking?Use this device to access the Linux console.
Need to access Operating system Console of your EV3 for hacking?Use this device to access the Linux console.
This lens is designed to permit Infrared light on to the CMOS chip of NXTCam or Pixy. If you plan to use NXTCam or Pixy for IR light detection (such as Roboball, IR soccer ball, candle or flame), use this lens for better results.
This lens is designed to permit Infrared light on to the CMOS chip of NXTCam or Pixy. If you plan to use NXTCam or Pixy for IR light detection (such as...
Control standard WS2812B RGB LED light strip from your EV3 brick. Kit includes:EV3Lights controller .5 Meter RGB LED strip Can control each LED individually
Control standard WS2812B RGB LED light strip from your EV3 brick. Kit includes:EV3Lights controller .5 Meter RGB LED strip Can control each LED...
CAN based LED STRIP Controller Kit for FRC RobotsProgram from roboRIO Control Standard LED Strips using CAN Kit includes:CANLight Controller 5 meter long LED Strip Power Connectors CAN signal cable
CAN based LED STRIP Controller Kit for FRC RobotsProgram from roboRIO Control Standard LED Strips using CAN Kit includes:CANLight Controller 5 meter long...
SD540B - PWM Motor Controller for FRC. New Design For 2017 Ordering for School? Send us your Purchase Order Order it here>
SD540B - PWM Motor Controller for FRC. New Design For 2017 Ordering for School? Send us your Purchase Order Order it here>
Rfid Tag reader for EV3 and NXT with tag kit
Rfid Tag reader for EV3 and NXT with tag kit
With this BombiniBot Starter Lesson Plan, get started quickly with your students!
With this BombiniBot Starter Lesson Plan, get started quickly with your students!
Measure ambient temperature as well as temperature of surrounding devices.Non-contact Temperature Sensor Resolution: 0.1 degrees For use with Arduino Includes an I2C cable to connect to Arduino
Measure ambient temperature as well as temperature of surrounding devices.Non-contact Temperature Sensor Resolution: 0.1 degrees For use with Arduino...
1 cable between 3 and 4 meters in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying by Paypal, make a note in Paypal comments. If you are paying by other method, send us an e-mail), Note, custom cut cables are not returnable.
1 cable between 3 and 4 meters in length, Comes with NXT/EV3 Compatible Phone jack connectors, Please specify desired length when ordering (If you are paying...
Track Lines, Colored Objects, Faces, Eyes and more! Capture Videos & pictures to microSD card autonomously!
Track Lines, Colored Objects, Faces, Eyes and more! Capture Videos & pictures to microSD card autonomously!
Track Lines, Colored Objects, Faces, Eyes and more! Capture Videos & pictures to microSD card autonomously!
Track Lines, Colored Objects, Faces, Eyes and more! Capture Videos & pictures to microSD card autonomously!
This is a stackable header for Raspberry Pi GPIO pins.
This is a stackable header for Raspberry Pi GPIO pins.
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 25 cables 35 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 25 cables 35 cm each
Use this cable to connect a RC battery to your controller.
Use this cable to connect a RC battery to your controller.
Includes a PSP-Nx-v4-REF (with Referee Signal Receiver) along with a 2.4GHZ RF Wireless Controller.
Includes a PSP-Nx-v4-REF (with Referee Signal Receiver) along with a 2.4GHZ RF Wireless Controller.
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 25 cables 10 cm each
Ribbon like thin and flexible, Comes with NXT/EV3 Compatible Phone jack connectors, Pack of 25 cables 10 cm each
This board attaches over the GPIO pins of RPi to give you direct access for I2C communication. Works with all Models of Pi
This board attaches over the GPIO pins of RPi to give you direct access for I2C communication. Works with all Models of Pi
8x8 LED Matrix interface for NXT and EV3
8x8 LED Matrix interface for NXT and EV3
Measure voltage of your electronic device. Upto: 26 volts Resolution: 1 milli-volt
Measure voltage of your electronic device. Upto: 26 volts Resolution: 1 milli-volt
Use this kit to connect several i2c devices to your Arduino or Raspberry Pi. Works with all Models of Pi.
Use this kit to connect several i2c devices to your Arduino or Raspberry Pi. Works with all Models of Pi.
Verify your cables for connectivity or faults using this tester. Particularly useful when you are crimping your own cables or reusing old cables.
Verify your cables for connectivity or faults using this tester. Particularly useful when you are crimping your own cables or reusing old cables.
Capacitive Soil Moisture Sensor for EV3.
Capacitive Soil Moisture Sensor for EV3.
This battery holder is designed for use with NXTServo or MTRMX-Nx. It has NXT compatible mounting holes to integrate it into your NXT contraption easily.
This battery holder is designed for use with NXTServo or MTRMX-Nx. It has NXT compatible mounting holes to integrate it into your NXT contraption easily.
You can use this device to send Numeric input to your NXT program. Digital Sensor Interface Attach to Sensor Port on NXT Input 0 to 9, # and *
You can use this device to send Numeric input to your NXT program. Digital Sensor Interface Attach to Sensor Port on NXT Input 0 to 9, # and *
Suitable for obstacle detection at two distance ranges Detect obstacles in front-left, front-right or straight ahead. Simple to use interface.
Suitable for obstacle detection at two distance ranges Detect obstacles in front-left, front-right or straight ahead. Simple to use interface.
WiFi Dongle for use with Raspberry Pi. Recommended for use with PiStorms.
WiFi Dongle for use with Raspberry Pi. Recommended for use with PiStorms.
This lens is designed to block Infrared light. For use in indoor or natural light setting. This is also the factory default lens on NXTCam-v4.
This lens is designed to block Infrared light. For use in indoor or natural light setting. This is also the factory default lens on NXTCam-v4.
Measure current of your electronic device. Upto: 12.5 amps Resolution: 1 milli-amps
Measure current of your electronic device. Upto: 12.5 amps Resolution: 1 milli-amps
Rechargeable Battery Pack for use with EVShield.Battery Capacity: 3000 mAH Includes a charging adapter.
Rechargeable Battery Pack for use with EVShield.Battery Capacity: 3000 mAH Includes a charging adapter.
This device combines Acceleration Sensor and Compass on single rigid package. It is configurable to different sensitivity levels of gravity, help you determine tilt and acceleration and magnetic heading in various intensities and 3 axes.
This device combines Acceleration Sensor and Compass on single rigid package. It is configurable to different sensitivity levels of gravity, help you...
Comes with servo and horn mounting hardware for NXT and installation instructions. This kit is designed to mount following Hitec Servos on NXT or EV3: HS-422 (90° or 180° or continuous rotation) HS-HS-425BB (90° or 180° or continuous rotation) HSR-1422CR (57 oz.in.) Continuous Rotation Standard Servo HS-485HB This kit does not include servos.
Comes with servo and horn mounting hardware for NXT and installation instructions. This kit is designed to mount following Hitec Servos on NXT or EV3: HS-422...
Use this to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.
Use this to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.
Use this kit to connect several i2c devices to your Arduino or Raspberry Pi. Works with all Models of Pi.
Use this kit to connect several i2c devices to your Arduino or Raspberry Pi. Works with all Models of Pi.
This is a standard USB cable (if you don't already have one) with mini-USB connector on one end. Length: 150 cm. (approx 4' 11").
This is a standard USB cable (if you don't already have one) with mini-USB connector on one end. Length: 150 cm. (approx 4' 11").
A real Arduino robot that provides students with a better understanding of the role of hardware vs software. It makes programming come to life for kids; something they can see, touch, and feel.
A real Arduino robot that provides students with a better understanding of the role of hardware vs software. It makes programming come to life for kids;...
Use these pins on your device to connect a LiPo battery. Works with all models of: NXTMMX, NXTServo, MTRMX-Nx Pack contains 2 pairs of pins
Use these pins on your device to connect a LiPo battery. Works with all models of: NXTMMX, NXTServo, MTRMX-Nx Pack contains 2 pairs of pins
This is a visible light blocking filter for NXTCam or Pixy Cam. You can use this filter to detect Infrared light emitted from any source, such as candle flame, or IR ball.
This is a visible light blocking filter for NXTCam or Pixy Cam. You can use this filter to detect Infrared light emitted from any source, such as candle...
Instead of Raspberry Pi, use a Wireless ESP826 with PiStorms! This board is based on ESP8266 WiFi Module, and provides Arduino programming on PiStorms.
Instead of Raspberry Pi, use a Wireless ESP826 with PiStorms! This board is based on ESP8266 WiFi Module, and provides Arduino programming on PiStorms.
Works with all Models of Pi Runs on 3 AA rechargeable batteries
Works with all Models of Pi Runs on 3 AA rechargeable batteries
Includes an EVShield and a Uno compatible MicroPython Board, 1Gb MicroSd card and USB cable. Supports all ev3 sensors and motors Programs using Blockly or Python.
Includes an EVShield and a Uno compatible MicroPython Board, 1Gb MicroSd card and USB cable. Supports all ev3 sensors and motors Programs using Blockly or...
Use this to connect your shields to power supply with barrel connector.
Use this to connect your shields to power supply with barrel connector.
Using this Relay Driver, you can control up to 2 Relays from your NXT or EV3.
Using this Relay Driver, you can control up to 2 Relays from your NXT or EV3.
This frame enables several options to connect LEGOs to your robot!
This frame enables several options to connect LEGOs to your robot!
Raspberry Pi 3 - Model B - ARMv7 with 1G RAM
Raspberry Pi 3 - Model B - ARMv7 with 1G RAM
3D printed Raspberry Pi case works with Raspberry Pi 2 Model B and Raspberry Pi 3 Model B
3D printed Raspberry Pi case works with Raspberry Pi 2 Model B and Raspberry Pi 3 Model B
This board attaches over the Arduino Pins to give you direct access for I2C communication.
This board attaches over the Arduino Pins to give you direct access for I2C communication.
Servo Motor with Metal Gears High Durability Metal Gears Standard PWM input (pulse range: 500μs to 2500μs) Voltage range: 4.8V to 7.5V (nominal 6.0V)
Servo Motor with Metal Gears High Durability Metal Gears Standard PWM input (pulse range: 500μs to 2500μs) Voltage range: 4.8V to 7.5V (nominal 6.0V)
Kit includes most usable sensors as follows: Light Sensor Moisture Sensor Sound Sensor Flame Detector
Kit includes most usable sensors as follows: Light Sensor Moisture Sensor Sound Sensor Flame Detector
Fingerprint Sensor for NXT and EV3
Fingerprint Sensor for NXT and EV3
Use this kit to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.
Use this kit to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.
Use this controller to run 2 High Current DC motors from your RPi. Works with all Models of Pi.
Use this controller to run 2 High Current DC motors from your RPi. Works with all Models of Pi.
This kit contains a very compact, light duty servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT/EV3 contraptions. The kit comes with mounting instructions. This item is discontinued, and it is replaced by SMK902MG (A kit with metal gear servos)
This kit contains a very compact, light duty servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT/EV3 contraptions....
12AWG Wire (Red) Sold in multiples of 1 foot (minimum order 3 feet).
12AWG Wire (Red) Sold in multiples of 1 foot (minimum order 3 feet).
12AWG Wire (Green) Sold in multiples of 1 foot (minimum order 3 feet).
12AWG Wire (Green) Sold in multiples of 1 foot (minimum order 3 feet).
12AWG Wire (White) Sold in multiples of 1 foot (minimum order 3 feet).
12AWG Wire (White) Sold in multiples of 1 foot (minimum order 3 feet).
12AWG Wire (Black) Sold in multiples of 1 foot (minimum order 3 feet).
12AWG Wire (Black) Sold in multiples of 1 foot (minimum order 3 feet).
Desktop Power Adapter Kit (9V, 1.5A) Use this kit to power your devices on your desktop.
Desktop Power Adapter Kit (9V, 1.5A) Use this kit to power your devices on your desktop.
SD540C - CAN Based Motor Controller for FRC New Design For 2017 Ordering for School? Send us your Purchase Order Order it here>
SD540C - CAN Based Motor Controller for FRC New Design For 2017 Ordering for School? Send us your Purchase Order Order it here>
T7 Screwdriver for SPIKE Prime Ultrasonic sensor screws.
T7 Screwdriver for SPIKE Prime Ultrasonic sensor screws.
Rfid Tag reader for Spike Prime and Robot Inventor with tag kit
Rfid Tag reader for Spike Prime and Robot Inventor with tag kit
Use this Kit to access Console of your Raspberry Pi from your PC. Works with all Models of Pi.
Use this Kit to access Console of your Raspberry Pi from your PC. Works with all Models of Pi.
Suitable for measuring fluid temperature. Measures ±0.5°C (Maximum) From −20°C to 100°C. Compact Sealed stainless tube design. Ultra low power consumption (<1mA)
Suitable for measuring fluid temperature. Measures ±0.5°C (Maximum) From −20°C to 100°C. Compact Sealed stainless tube design. Ultra low power consumption...
Use this attachment for your BombiniBot to attach a Sharpie
Use this attachment for your BombiniBot to attach a Sharpie
9 Grams Servo Motor with Metal Gears
9 Grams Servo Motor with Metal Gears
This kit is ideal platform to build your own device for RPi. Works with Model A, A+, B, B+ and Pi 2 B
This kit is ideal platform to build your own device for RPi. Works with Model A, A+, B, B+ and Pi 2 B
Control standard WS2812B RGB LED light strip from your EV3 brick. Kit includes:EV3Lights controller
Control standard WS2812B RGB LED light strip from your EV3 brick. Kit includes:EV3Lights controller
Use this kit to assemble your own SmartUPS. Works with all Models of Pi
Use this kit to assemble your own SmartUPS. Works with all Models of Pi
Use this to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.
Use this to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.
XT60 Connectors (Pack of 5 Male and Female connectors)
XT60 Connectors (Pack of 5 Male and Female connectors)
Ultraviolet radiation (UVindex, UVa, UVb) Sensor for EV3
Ultraviolet radiation (UVindex, UVa, UVb) Sensor for EV3
TFT Display for Spike Prime and Robot Inventor.
TFT Display for Spike Prime and Robot Inventor.
Firmware Upgrader Tool for SD540 Motor Controllers
Firmware Upgrader Tool for SD540 Motor Controllers
Desktop Power Adapter (9V, 1.5A)
Desktop Power Adapter (9V, 1.5A)
Camera Module for Raspberry Pi with changeable lens
Camera Module for Raspberry Pi with changeable lens
This board attaches over the GPIO pins of RPi to give you direct access for I2C communication. Works with all Models of Pi Requires soldering
This board attaches over the GPIO pins of RPi to give you direct access for I2C communication. Works with all Models of Pi Requires soldering
Pi-Pan provides Pan and tilt movements for your Raspberry Pi Camera.Kit Includes: Plastic mounts for Camera and Servos Servo controller board Nylon Gear Servos and screws This product is discontinued and it is replaced by this kit
Pi-Pan provides Pan and tilt movements for your Raspberry Pi Camera.Kit Includes: Plastic mounts for Camera and Servos Servo controller board Nylon Gear...
Measure ambient temperature as well as temperature of surrounding devices.Non-contact Resolution: 0.1 degrees Returns values in Celsius and Fahrenheit SPIKE Prime Compatible interface Connector Python API and example included.
Measure ambient temperature as well as temperature of surrounding devices.Non-contact Resolution: 0.1 degrees Returns values in Celsius and Fahrenheit...
This is a tilt compensated Compass designed for Mindstorms NXT kit. Built in Acceleration sensor helps provide superior performance even in rough environment.
This is a tilt compensated Compass designed for Mindstorms NXT kit. Built in Acceleration sensor helps provide superior performance even in rough environment.
This kit contains a medium duty servo motor (HS311), mounting plates, horn plates and mounting hardware to integrate it with your NXT or EV3 contraptions. The kit comes with mounting instructions.
This kit contains a medium duty servo motor (HS311), mounting plates, horn plates and mounting hardware to integrate it with your NXT or EV3 contraptions....
Specifically designed for Raspberry Pi (Model A/B), with a latching type holder. (Not required for model A+ or B+)
Specifically designed for Raspberry Pi (Model A/B), with a latching type holder. (Not required for model A+ or B+)
This board attaches over the Arduino Pins to give you direct access for I2C communication.
This board attaches over the Arduino Pins to give you direct access for I2C communication.
Illuminate your subjects in darkness!! Use this light on your NoIR Pi Camera to capture images in dark. Contains 1 IR LED Micro-USB socket for power input Works with all Models of PiThis product is discontinued. Instead of this, use: High Power Infrared Light for RPi NoIR Camera
Illuminate your subjects in darkness!! Use this light on your NoIR Pi Camera to capture images in dark. Contains 1 IR LED Micro-USB socket for power input...
Continuous Rotation Servo Motor for Robots Light-weight Nylon Gears Standard PWM input (pulse range: 500μs to 2500μs) Voltage range: 4.8V to 7.5V (nominal 6.0V)
Continuous Rotation Servo Motor for Robots Light-weight Nylon Gears Standard PWM input (pulse range: 500μs to 2500μs) Voltage range: 4.8V to 7.5V (nominal 6.0V)
Control Pneumatic valves with EV3 (or NXT). Includes all the required hardware. Includes Assembly instructions. (this kit requires NXTServo-v2 or similar servo controller). This item is discontinued and replaced by PSMV-MG-V (A kit with metal gear servos)
Control Pneumatic valves with EV3 (or NXT). Includes all the required hardware. Includes Assembly instructions. (this kit requires NXTServo-v2 or similar...
Plug and Play kit for classroom, just add your LEGO parts and start using in your classroom! Includes3 PiStorms Kits, including Raspberry Pis & SD Cards with pre-configured software Long life rechargeable batteries Pre-configured WiFi Router for ease of Ethernet connectivity
Plug and Play kit for classroom, just add your LEGO parts and start using in your classroom! Includes3 PiStorms Kits, including Raspberry Pis & SD...
IR LED for Raspberry Pi Camera Module
IR LED for Raspberry Pi Camera Module
Control your NXT or EV3 robot using a Sony PlayStation 2 Compatible Controller/joystick. This is a PSP-Nx-v4 with Infrared Referee Signal Receiver.Send Referee Signals as:Game Start Autonomous Mode Begin Teleop Mode Begin Game End
Control your NXT or EV3 robot using a Sony PlayStation 2 Compatible Controller/joystick. This is a PSP-Nx-v4 with Infrared Referee Signal Receiver.Send...
Use this to access Console of your Raspberry Pi from your PC. Works with all Models of Pi.
Use this to access Console of your Raspberry Pi from your PC. Works with all Models of Pi.
This product is discontinued. We recommend NXTCam5 instead. Use this adapter to attach Pixy Camera to your EV3/NXT brick.Supports EV3 Block Programming Easy to Use
This product is discontinued. We recommend NXTCam5 instead. Use this adapter to attach Pixy Camera to your EV3/NXT brick.Supports EV3 Block...
This controller is designed to be a compact controller for PF Motors using IR communications through PF receivers. The Red spacer bricks and the PF IR receiver seen in the picture are not part of this controller.
This controller is designed to be a compact controller for PF Motors using IR communications through PF receivers. The Red spacer bricks and the PF IR...
16 RGB LED Ring light with individual led control for SPIKE Prime and Robot Inventor
16 RGB LED Ring light with individual led control for SPIKE Prime and Robot Inventor
