|
Description
|
Price
|
Quantity
|
|---|
 Active Sensor Multiplexer - The RCX has only 3 sensor input connectors. Most of the sophisticated robot designs need more than three sensors. Active Sensor Multiplexer lets you connect extra 3 Actively Powered sensors to single input port. Thus giving designer the power of total 9 sensors for each RCX.
Click here for Details
|
-na-
|
|
 I2C Compass (CMP2X) - high precision compass sensor with I2C interface.
Click here for Details
|
-na-
|
|
 Compass for VEX - high precision compass for VEX kits.
Click here for Details
|
-na-
|
|
 USR40X - Digital Ultrasonic Ranger - is high performance multidetecting digital sensor, which can be used with OOPic, Basic Stamp, BS2p as well as wide variety of mirocontrollers that have I2C bus for data communication.
* Can be used with I2C bus.
* Can be used in analog mode.
* Reads upto 16 different obstacle ranges.
* Reads between 6 inches to 30 feet (in I2C mode)
* Reads between 6 inches to 18 feet (in analog mode)
Click here for Details
|
-na-
|
|
 Passive Sensor Multiplexer - The RCX has only 3 sensor input connectors. Most of the sophisticated robot designs need more than three sensors. Passive sensor multiplexer lets you connect three Boolean sensors (touch sensor) at a time to single RCX sensor input port. With a simple logical decision you can find out which of the touch sensors are pressed.
Click here for Details
|
-na-
|
|
 Acceleration Sensor for NXT - (ACCL-Nx-2g2x)
Use this sensor as a Tilt sensor, or measuring velocity or accelerations.
* Digital Sensor with I2C interface
* +/- 2G sensitivity, 2 Axis reading.
* Supported in NXT-G, NXC/NBC, RobotC
* Use for measuring static and dynamic accelerations
Click here for Details
|
-na-
|
|
Acceleration Sensor for NXT - (ACCL-Nx-3g3x)
Use this sensor as a Tilt sensor, or measuring velocity or accelerations.
* Digital Sensor with I2C interface
* +/- 3G sensitivity, 3 Axis reading.
* Supported in NXT-G, NXC/NBC, RobotC
* Use for measuring static and dynamic accelerations
Click here for Details
|
-na-
|
|
Acceleration Sensor for NXT - (ACCL-Nx-5g2x)
Use this sensor as a Tilt sensor, or measuring velocity or accelerations.
* Digital Sensor with I2C interface
* +/- 5G sensitivity, 2 Axis reading.
* Supported in NXT-G, NXC/NBC, RobotC
* Use for measuring static and dynamic accelerations
Click here for Details
|
-na-
|
|
 Multi-Sensitivity Acceleration Sensor for NXT - (ACCL-Nx-v2)
This 3 axis accelerometer has multiple sensitivity levels of gravity. Use as a Tilt sensor, or measuring velocity or accelerations.
* Digital Sensor with I2C interface
* 3 Axis reading.
* Sensitivities: 2.5G 3.3G, 6.7G, 10.0G
* Supported in NXT-G, NXC/NBC, RobotC
* Use for measuring static and dynamic accelerations
Click here for Details
|
-na-
|
|
 This Motor Multiplexer (MOTORMUX) is specifically designed medium power motor driver, to drive four LEGO motors. (Technically: Quad 35Volt 0.6Amp H Bridge Motor Drive). Note, to connect this controller to RCX, you will need RCX-I2C module or similar I2C interface.
Click here for Details
|
-na-
|
|
 This 8-channel servo controller module (I2C-SC8) can control position and speed of upto 8 servo motors individually. This ESC can drive up to 8 RC servos at a 24mS refresh rate regardless of the number of servo's used and servo position. It can be operated by sending commands over the I2C bus. (This controller can not be used with Mindstorms NXT).
Click here for Details
|
-na-
|
|
 NXT Based Human Interface Device - Using this device you can send HID input events (such as keyboard key presses) to host computer. These events can be received by any program that can run on your PC.
Click here for Details
|
-na-
|
|
 Compass for RCX (CMP01L)- is high precision sensor that connects to an RCX input port. This sensor measures the earth's magnetic field and reports heading angle clockwise from magnetic north.
* Easy to use.
* Use it as a 'Light Sensor' on your RCX.
* Can be used with ROBOLAB, RIS-1.0, RIS-2.0 or LejOS.
* Can be used with AMUX (Active Sensor Multiplexer)
Click here for Details
|
-na-
|
|
 The RCX-I2C module is an interface between your RCX and any I2C devices like SRF08 or SRF10 distance sensors. Documentation with NQC example program and header file is available to get started with using your I2C devices or sensors. You can connect upto 128 I2C devices to this I?C module (that's a standard feature of I?C bus). Bit rate on the I2C bus is approximately 100KHz.
Click here for Details
|
-na-
|
|
 USPD40 - ultrasonic proximity detector - 40khz - Ultrasonic distance measurement techniques performs much better than optical techniques in unclean environments or with transparent or black objects. It has lower resolution (fraction of wavelength of sound) when compared with resolution of optical techniques. USPD40 output is linear with distance. Since USPD40 is a low power device, it can operate continuously. This sensor uses Variable gain amplifier and active band pass filter.
Click here for Details
|
-na-
|
|
 USPD24 - ultrasonic proximity detector - 24khz - Ultrasonic distance measurement techniques performs much better than optical techniques in unclean environments or with transparent or black objects. It has lower resolution (fraction of wavelength of sound) when compared with resolution of optical techniques. USPD24 output is linear with distance. Since USPD24 is a low power device, it can operate continuously. This sensor uses Variable gain amplifier and active band pass filter.
Click here for Details
|
-na-
|
|
 Realtime Clock
* Battery backed for upto 10 years
* Counts Seconds, minutes, hours, date, year, leap-year
Click here for Details
|
-na-
|
|
 This Motor powered Sharp GP2D12 infrared distance sensor interface - comes with Sharp GP2D12 sensor. Sharp GP2D12 can precisely and reliably read distance from 10cm-80cm. Sharp GP2D12 provides your RCX with capability of measuring distances from an obstacle.
Click here for Details
|
-na-
|
|
 Serial (RS232, IIC / I2C, SPI) LCD Module - The LCD216S is designed to be an easily integrable display in simple or advanced projects. LCD216S can be used in Inverted RS232, noninverted RS232, SPI or IIC / I2C mode, giving user ultimate control of choosing the interface.
Click here for Details
|
-na-
|
|
 Long Range Dual Infra Red Obstacle Detector (DROD40) - can be used when your Robot needs an "Eye or Touch" in order to sense the possible obstacles in its way. This Sensor uses Infra Red Radiation and detects the reflected waves or radiation from the obstacle ahead. It can detect obstacles in front-left, front-right or straight ahead. Range: 6" to 18" (15cm - 45cm). Use as a "light sensor" in RIS or ROBOLAB.
Click here for Details
|
-na-
|
|
 Power Meter for NXT - Measure the power consumption of your robot (or any other device) while in operation.
Measure:
* Current Drawn
* Voltage
* Power Consumption
* Energy Utilization
Comes with probes to connect to NXT. Out of Stock
Click here for Details
|
-na-
|
|
 Short Range Dual Infra Red Obstacle Detector (DROD56) - can be used when your Robot needs an "Eye or Touch" in order to sense the possible obstacles in its way. This Sensor uses Infra Red Radiation and detects the reflected waves or radiation from the obstacle ahead. It can detect obstacles in front-left, front-right or straight ahead. Superior performance for detecting closer objects or debries. Range: 4" to 6" (10cm - 15cm). Use as a "light sensor" in RIS or ROBOLAB.
Click here for Details
|
-na-
|
|
 Multi-Sensitivity Acceleration Sensor v3 for NXT - (ACCL-Nx-v3)
This tiny and lightweight 3 axis accelerometer has multiple sensitivity levels of gravity. Use as a Tilt sensor, or measuring velocity or accelerations.
* Digital Sensor with I2C interface
* 3 Axis reading.
* Sensitivities: 1.5G 2G, 4G, 6G
* Supported in NXT-G, NXC/NBC, RobotC, LeJOS
* Use for measuring static and dynamic accelerations End of Life
Click here for Details
|
-na-
|
|
 RCX Sensor multiplexer for NXT - RXMux allows you to connects upto 4 RCX style sensors to NXT.
It Supports:
* RCX Touch Sensor
* RCX Light Sensor
* RCX Rotation sensor
* RCX Temperature sensor
Click here for Details
|
-na-
|
|
 RCX to NXT Communication Adapter (NRLink-Nx) -
NRLink-Nx is a perfect solution for those who have RCX or LEGO trains or PF motors and need to control them using NXT.
* Control RCX with NXT
* Control LEGO trains with NXT
* Control PF motors (Technic Bulldozer) with NXT
* Communication using Infrared
* Bi-directional communication between RCX and NXT
Click here for Details
|
-na-
|
|
 Magnetic compass for NXT (CMPS-Nx) - This magnetic compass measures the earth's magnetic field and reports heading angle clockwise from magnetic north. It uses orthogonal two-axis magnetic sensor from Honeywell (HMC1052) and provides digital communication with NXT.
* Supported in NXT-G, NXC/NBC, LeJOS and RobotC
* Higher resolution supported in NXC/NBC and RobotC
Click here for Details
|
-na-
|
|
 Pneumatic Pressure Sensor v2 for NXT (PPS35-Nx-v2)
This sensor will be useful for those who use LEGO pneumatics with NXT.
* Range from 0 to 35 PSI or 0 to 240 kg/sqcm.
* Supported in NXT-G, RobotC and NXC/NBC.
Click here for Details
|
-na-
|
|
![[home]](themes/winzor/images/ms-logo.png){kind=logo}
![[Main Menu]](themes/winzor/images/menu.png)
