Hardware Related   Started by Ivy wong   2016-09-18 18:20:19 -04:00   Comments: 4    Viewed: 421

  1. Ivy wong
    Ivy wong Member
    Hi, I am trying to use NXTCamView on windows 10 with the NXTCam-v3. I got driver installed successfully, but keep get error message from NXTCamView that failed on COM. Can not change the COM in NXTCamView since it only list the one assigned to the device. Tried assign another COM to NXTCam from device manage panel (under the driver setting advance ), still not working. 

    Ivy wong, 2016-09-18 18:20:19 -04:00
  2. Deepak Patil
    Deepak Patil Administrator Staff Member Richmond
    While installing USB driver, there are two drivers that need to be installed. be sure that you installed both the drivers.
    Also while installing, you may have to disable 'Driver Signature Enforcement'.
    follow instructions from following url to install the drivers, 

    let us know how it goes.
    Deepak Patil, 2016-09-19 09:48:00 -04:00
  3. Ivy wong
    Ivy wong Member

    Thanks for reply. what are the two drivers you refering to specifically? I was following the instruction installed both NXTCam_v3p0 and NXTCam-v4 drivers. but still got the same error message that is COM3 can not open. But I made the connection successfully on Linux. the problem with linux is it seems still not working properly, when I select capture, the frame coundn't recognize color. any object in the frame is very vague and dark.
    Ivy wong, 2016-09-23 15:31:17 -04:00
  4. Ivy wong
    Ivy wong Member

    Ivy wong, 2016-09-23 15:31:23 -04:00
  5. (You must log in or sign up to post here)

Log in | Sign up
Tems & Conditions!