NumericPad in EV3 environment doesn't wotk
 Software and Programming Related   Started by Luca Grilli   2016-10-15 09:20:22 -04:00   Comments: 3    Viewed: 317

  1. Luca Grilli
    Luca Grilli Member
    Hi, I'm trying to use numericPad with EV3 environment. I've followed the guide and successfully imported the block. Dragging it in the canvas, appears a wrong message with "This block or mode is not supported on the connected brick". I've tried also to downgrade to firmware version V1.08H but unfortunately it hasn't worked. Have you got a suggestion for me? Can the numericPad just arrived be broken? In this case could you send me another one?
    Here a screen shot with the problem

    numericPad issue

    Kind Regards,

    Luca Grilli, 2016-10-15 09:20:22 -04:00
  2. Nitin Patil
    Nitin Patil Member Staff Member
    numericPad block only works  nxt.
    Nitin Patil, 2016-10-17 09:09:13 -04:00
  3. Luca Grilli
    Luca Grilli Member
    your web site writes:

    "This vision subsystem connects to NXT or EV3 on a standard sensor port, and tracks up to 8 colored objects or Line. It reports coordinates of each object to Host. Can also be connected to a PC on USB port.

    • Connects to EV3/NXT on a sensor port"   link

    Moreover "Baby Bebop" video uses EV3. And  website has a download section with the block specifically for EV3 to be imported.

    Please argue your statement, I've bought NumericPad considering your information true.

    Luca Grilli, 2016-10-17 18:46:44 -04:00
  4. (You must log in or sign up to post here)

Log in | Sign up
Tems & Conditions!