8Channel Servo Controller for EV3 with Servo Operated Pneumatic Valve
 Software and Programming Related   Started by Olga Plaksina   2017-04-01 11:33:16 -04:00   Comments: 3    Viewed: 385

  1. The programm which turns on pneumatic valves through 8 Channel servo controller on EV3 (the brick with a "horse") worked perfectly just 3 month ago, and when I tried to run it today it just does not recognize 8 Channel Servo Controller and does not do any moves.  I checked the batteries and they are fine, all connections are correct and they are as they were 3 months ago. The Port View always had problems recognizing Mindsensors but the program worked regardless.  Now, the EV3 port does not recognizes 8 Channel Servo Controller, and there is nothing I can do about it.  However, it seems that without recognizing the controller the pneumatic valves will not work.  Any ideas?
    Olga Plaksina, 2017-04-01 11:33:16 -04:00
  2. Mindsensors Support
    Mindsensors Support Member Richmond
    What is the firmware version of your EV3?
    Mindsensors Support, 2017-04-03 09:32:18 -04:00
  3. Randy Woods
    Randy Woods Member
    Thanks for sharing such great information, the post you published have some great information which is quite beneficial for me.

    Indigo Card
    Randy Woods, 2021-11-10 01:04:07 -05:00
  4. (You must log in or sign up to post here)

Log in | Sign up
Tems & Conditions!
Help!