PiStorms-v2: NXT motor causes program failure
 Hardware Related   Started by Egon   2017-11-21 15:04:09 -05:00   Comments: 1    Viewed: 185

  1. Egon
    Egon Member

    using a NXT motor with PiStorms (e.g. 04-Motor-Demo.py or any other program) causes the program to fail ("black screen") after first motor command and movement, followed by a reboot shortly after a few seconds.
    After some failures the bank won't work any more, while other banks show the aforementioned behavior.

    We're using a power supply (the Pistorms display reads 9 to 10 Volts)
     - Raspberry Pi 3 Model B V 1.2
     - and just tried a fresh install with pistorms-4.016.img.

    Other demos showing system variables or using sensors work fine.

    Egon, 2017-11-21 15:04:09 -05:00
  2. (You must log in or sign up to post here)

Log in | Sign up
Tems & Conditions!