Arduino + EVShield + IR Beacon on Channel 4
 Arduino   Started by Stuart Crouch   2018-05-03 15:17:08 -04:00   Comments: 3    Viewed: 179

  1. Hi Everyone,
    I have successfully run the demo program EVShield_tests -- ev3_infrared -- ev3_infrared_beacon on Channels 1, 2, and 3 of the IR remote. However, no data is returned on Channel 4 (I get Heading -1 and Proximity 255 on all five of my IR remotes).

    I get the same result on ports BAS1, BAS2, BBS1 and BBS2.
    I also get the same results on my own sketches.

    Can anybody help to explain this please?

    Many thanks,
    Regards,
    Stuart
    Stuart Crouch, 2018-05-03 15:17:08 -04:00
  2. Me again,
    I can also confirm that I get no readings (other than a constant '255') on channel 4, using your ev3_infrared_remote sketch.

    I get the same result on ports BAS1, BAS2, BBS1 and BBS2.

    Thanks again,
    Regards,
    Stuart
    Stuart Crouch, 2018-05-05 07:40:11 -04:00
  3. Can anyone from Mindsensors.com comment on this, please?
    Thanks,
    Stuart
    Stuart Crouch, 2018-05-10 08:24:07 -04:00
  4. (You must log in or sign up to post here)

Log in | Sign up
Tems & Conditions!
Help!