I made a panorama
 Showcase Your Creations   Started by Deepakk S   2015-09-15 09:52:05 -04:00   Comments: 3    Viewed: 868

  1. Deepakk S
    Deepakk S Member

    Postby deepak » Thu Dec 05, 2013 3:44 pm

    I made a panorama using Raspberry Pi with Pi-Pan -
    Panorama of a construction site
    hcv-w1300.jpg (116.02 KiB) Viewed 1723 times

    I configured the python script in /etc/init.d before going to the site.
    I attached Raspberry Pi to a car cigarette lighter USB adapter, and placed it on driver-side mirror.
    Soon after connecting, Pi booted up, and started taking pictures.
    It took about 2 minutes to capture the pictures. I shot two rows of 8 pictures.
    Then I used autostitch to build the panorama.
    (I had to then scale the picture down quite a bit to upload here.)
    Deepakk S, 2015-09-15 09:52:05 -04:00
  2. Moryss S
    Moryss S Member
    Postby Morys Crane » Fri May 09, 2014 12:11 am
     
    I power my Rpi with my cell phone cable and have had no issues so far. I'm by no means an expert in this area but i'd assume(key word assume) that any mini usb cable will work. Everyone correct me if i'm wrong.
    Moryss S, 2015-09-15 09:54:35 -04:00
  3. Mindsensors Support
    Mindsensors Support Member Richmond
    Postby support » Fri May 09, 2014 6:47 am

    RPi has micro-usb connector, so you would need Micro-USB cable. Any micro-usb cable will work.
    The RPi with Servo motors and camera needs about 1.2Amps current, so, ensure that your adapter provides that much output.
    Mindsensors Support, 2015-09-15 09:55:33 -04:00
  4. (You must log in or sign up to post here)

Log in | Sign up
Tems & Conditions!
Help!