• $109.75
    $109.75
    3 Review(s)

    Make LEGO Robot with Raspberry Pi Brains! Works with Raspberry Pi A+, B+, Pi 2 & Pi 3

    Make LEGO Robot with Raspberry Pi Brains! Works with Raspberry Pi A+, B+, Pi 2 & Pi 3

  • $129.00
    $129.00
    3 Review(s)

    Make LEGO Robot with Raspberry Pi Brains! Works with Raspberry Pi A+, B, Pi 2 & Pi 3 Includes PiStorms-v2 Base Kit 8GB SD Card with Ready to use PiStorms Image

    Make LEGO Robot with Raspberry Pi Brains! Works with Raspberry Pi A+, B, Pi 2 & Pi 3 Includes PiStorms-v2 Base Kit 8GB SD Card with Ready to use PiStorms Image

  • $164.00
    $164.00
    3 Review(s)

    Make stunning LEGO Robot with Raspberry Pi Brains! This kit includes everything you need, just add your LEGO parts and you are ready roll! Includes PiStorms Base Kit 8GB SD Card with Ready to use PiStorms Image Raspberry Pi™ 3 Model B Single Board Computer

    Make stunning LEGO Robot with Raspberry Pi Brains! This kit includes everything you need, just add your LEGO parts and you are ready roll! Includes PiStorms...

  • $42.95
    $42.95

    Pi-Pan provides Pan and tilt movements for your Raspberry Pi Camera.Kit Includes: Plastic mounts for Camera and Servos Servo controller board 2 Metal Gear Servos and screws

    Pi-Pan provides Pan and tilt movements for your Raspberry Pi Camera.Kit Includes: Plastic mounts for Camera and Servos Servo controller board 2 Metal Gear...

  • $4.95
    $4.95

    Use these mounts to affix your PiCamera. Includes screws to mount camera Several mount configurations Can be mounted on a RC Servo

    Use these mounts to affix your PiCamera. Includes screws to mount camera Several mount configurations Can be mounted on a RC Servo

  • $64.75
    $64.75

    Works with all Models of Pi Runs on 3 AA rechargeable batteries

    Works with all Models of Pi Runs on 3 AA rechargeable batteries

    Add to cart
  • $1.95
    $1.95

    Use this cable to connect a RC battery to your controller.

    Use this cable to connect a RC battery to your controller.

  • $19.99
    $19.99

    PiServoController can connect up to 6 servos to your Raspberry Pi. Provides Signal Buffering Provides Power Stabilization Works with all Models of Pi

    PiServoController can connect up to 6 servos to your Raspberry Pi. Provides Signal Buffering Provides Power Stabilization Works with all Models of Pi

  • $39.75
    $39.75

    Use this kit to assemble your own SmartUPS. Works with all Models of Pi

    Use this kit to assemble your own SmartUPS. Works with all Models of Pi

  • $7.95
    $7.95

    This is a standard USB cable (if you don't already have one) with mini-USB connector on one end. Length: 150 cm. (approx 4' 11").

    This is a standard USB cable (if you don't already have one) with mini-USB connector on one end. Length: 150 cm. (approx 4' 11").

  • $6.95
    $6.95

    Mounting Kit to mount SmartUPS on RPi.

    Mounting Kit to mount SmartUPS on RPi.

  • $2.39
    $2.39

    Male to Female Jumper cables for I2C communication. 4 Core cables Pack of 2 Length: 150mm each Works with all Models of Pi

    Male to Female Jumper cables for I2C communication. 4 Core cables Pack of 2 Length: 150mm each Works with all Models of Pi

  • $12.45
    $12.45

    This Case is designed to fit Pi-Pan and allow for its cables.Material: Black Acrylic

    This Case is designed to fit Pi-Pan and allow for its cables.Material: Black Acrylic

  • $12.45
    $12.45

    This Case is designed for Model B+ and also fits Pi-Pan and allows for its cables. The case is stack-able, so that you can stack several cases on each other. Material: Black Acrylic Works with Model B+, Pi 2 B & Pi 3

    This Case is designed for Model B+ and also fits Pi-Pan and allows for its cables. The case is stack-able, so that you can stack several cases on each...

  • $12.45
    $12.45

    This Case is designed to fit Pi-Pan and allow for its cables, the case is stack-able, so that you can stack several cases on each other. Material: Clear Acrylic Works with Model A, B Note, The Raspberry Pi as seen in picture is not included.

    This Case is designed to fit Pi-Pan and allow for its cables, the case is stack-able, so that you can stack several cases on each other. Material: Clear...

  • $12.45
    $12.45

    This Case is designed for Model B+ and also fits Pi-Pan and allows for its cables. The case is stack-able, so that you can stack several cases on each other. Material: Clear Acrylic Works with Model B+, Pi 2 B & Pi 3 (Pi not included)

    This Case is designed for Model B+ and also fits Pi-Pan and allows for its cables. The case is stack-able, so that you can stack several cases on each...

  • $12.45
    $12.45

    This Case is designed to fit Pi-Pan and allow for its cables, the case is stack-able, so that you can stack several cases on each other. Material: Purple with Mirror finish Works with Model A, B

    This Case is designed to fit Pi-Pan and allow for its cables, the case is stack-able, so that you can stack several cases on each other. Material: Purple...

  • $24.95
    $24.95

    Use this to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.

    Use this to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.

  • $24.95
    $24.95

    Use this kit to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.

    Use this kit to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.

  • $24.95
    $24.95

    Use this kit to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.

    Use this kit to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.

  • $24.95
    $24.95
    1 Review(s)

    Use this to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.

    Use this to access Console of your Raspberry Pi wirelessly. Works with all Models of Pi.

  • $69.95
    $69.95

    Use this controller to run 2 High Current DC motors from your RPi. Works with all Models of Pi.

    Use this controller to run 2 High Current DC motors from your RPi. Works with all Models of Pi.

  • $15.95
    $15.95

    Use this to access Console of your Raspberry Pi from your PC. Works with all Models of Pi.

    Use this to access Console of your Raspberry Pi from your PC. Works with all Models of Pi.

  • $15.95
    $15.95

    Use this Kit to access Console of your Raspberry Pi from your PC. Works with all Models of Pi.

    Use this Kit to access Console of your Raspberry Pi from your PC. Works with all Models of Pi.

  • $0.99
    $0.99

    This is a stackable header for Raspberry Pi GPIO pins.

    This is a stackable header for Raspberry Pi GPIO pins.

  • $14.99
    $14.99

    Pi-Light fits on Pi-Pan, in front of Pi-Camera to provide light for Pi-Camera. Works with all Models of RPi. (Includes a connecting cable)

    Pi-Light fits on Pi-Pan, in front of Pi-Camera to provide light for Pi-Camera. Works with all Models of RPi. (Includes a connecting cable)

  • $0.69
    $0.69

    Clip for 9 Volt battery.

    Clip for 9 Volt battery.

  • $2.69
    $2.69

    This board attaches over the GPIO pins of RPi to give you direct access for I2C communication. Works with all Models of Pi

    This board attaches over the GPIO pins of RPi to give you direct access for I2C communication. Works with all Models of Pi

  • $1.49
    $1.49

    This board attaches over the GPIO pins of RPi to give you direct access for I2C communication. Works with all Models of Pi Requires soldering

    This board attaches over the GPIO pins of RPi to give you direct access for I2C communication. Works with all Models of Pi Requires soldering

  • $1.69
    $1.69

    Use this kit to connect several i2c devices to your Arduino or Raspberry Pi. Works with all Models of Pi.

    Use this kit to connect several i2c devices to your Arduino or Raspberry Pi. Works with all Models of Pi.

  • $2.99
    $2.99

    Use this kit to connect several i2c devices to your Arduino or Raspberry Pi. Works with all Models of Pi.

    Use this kit to connect several i2c devices to your Arduino or Raspberry Pi. Works with all Models of Pi.

  • $19.75
    $19.75

    Illuminate your subjects in darkness!! Use this light on your NoIR Pi Camera to capture images in dark. Contains 1 IR LED Micro-USB socket for power input Works with all Models of PiThis product is discontinued. Instead of this, use: High Power Infrared Light for RPi NoIR Camera

    Illuminate your subjects in darkness!! Use this light on your NoIR Pi Camera to capture images in dark. Contains 1 IR LED Micro-USB socket for power input...

    Add to cart
  • $23.75
    $23.75

    Illuminate your subjects in darkness!! Use this light on your NoIR Pi Camera to capture images in dark. Contains 2 IR LEDs Micro-USB socket for power input Works with all Models of Pi

    Illuminate your subjects in darkness!! Use this light on your NoIR Pi Camera to capture images in dark. Contains 2 IR LEDs Micro-USB socket for power input...

  • $8.75
    $8.75

    This kit is ideal platform to build your own device for RPi. Works with Model A, A+, B, B+ and Pi 2 B

    This kit is ideal platform to build your own device for RPi. Works with Model A, A+, B, B+ and Pi 2 B

  • $7.95
    $7.95

    This kit is ideal platform to build your own device for RPi. Works with Model A, A+, B and B+

    This kit is ideal platform to build your own device for RPi. Works with Model A, A+, B and B+

  • $5.95
    $5.95

    Specifically designed for Raspberry Pi (Model A/B), with a latching type holder. (Not required for model A+ or B+)

    Specifically designed for Raspberry Pi (Model A/B), with a latching type holder. (Not required for model A+ or B+)

  • $0.99
    $0.99

    Perfect length for RPi projects.

    Perfect length for RPi projects.

  • $52.94
    $52.94

    Get Pi-Pan Kit with PiLight for your Raspberry Pi Camera. Compatible with all models of Pi.

    Get Pi-Pan Kit with PiLight for your Raspberry Pi Camera. Compatible with all models of Pi.

  • $9.95
    $9.95

    3D printed Raspberry Pi case  works with Raspberry Pi 2 Model B and Raspberry Pi 3 Model B

    3D printed Raspberry Pi case  works with Raspberry Pi 2 Model B and Raspberry Pi 3 Model B

  • $14.95
    $14.95

    This frame enables several options to connect LEGOs to your robot!

    This frame enables several options to connect LEGOs to your robot!

  • $5.95
    $5.95

    WiFi Dongle for use with Raspberry Pi. Recommended for use with PiStorms.

    WiFi Dongle for use with Raspberry Pi. Recommended for use with PiStorms.

  • $4.95
    $4.95

    Camera mount for PiStorms

    Camera mount for PiStorms

  • $4.95
    $4.95

    Desktop Power Adapter (9V, 1.5A)

    Desktop Power Adapter (9V, 1.5A)

    Add to cart
  • $6.50
    $6.50

    Desktop Power Adapter Kit (9V, 1.5A) Use this kit to power your devices on your desktop.

    Desktop Power Adapter Kit (9V, 1.5A) Use this kit to power your devices on your desktop.

    Add to cart
  • Online only
    $0.00
    $0.00

    Camera Mount for PiStorms - CAD files. Free Download. Customize the Frame to your needs and print on a 3D printer.

    Camera Mount for PiStorms - CAD files. Free Download. Customize the Frame to your needs and print on a 3D printer.

  • $7.95
    $7.95

    This battery holder is designed to hold 6 AA batteries. It has LEGO NXT/EV3 compatible mounting to integrate it into your LEGO contraption easily.

    This battery holder is designed to hold 6 AA batteries. It has LEGO NXT/EV3 compatible mounting to integrate it into your LEGO contraption easily.

  • $39.99
    $39.99

    Pi-Pan provides Pan and tilt movements for your Raspberry Pi Camera.Kit Includes: Plastic mounts for Camera and Servos Servo controller board Nylon Gear Servos and screws This product is discontinued and it is replaced by this kit

    Pi-Pan provides Pan and tilt movements for your Raspberry Pi Camera.Kit Includes: Plastic mounts for Camera and Servos Servo controller board Nylon Gear...

    Add to cart
  • $48.00
    $48.00

    Raspberry Pi 3 - Model B - ARMv7 with 1G RAM

    Raspberry Pi 3 - Model B - ARMv7 with 1G RAM

  • $4.45
    $4.45

    This battery holder is designed to hold 6 AA batteries.

    This battery holder is designed to hold 6 AA batteries.

  • $599.00
    $599.00

    Plug and Play kit for classroom, just add your LEGO parts and start using in your classroom! Includes 3 PiStorms Kits, including Raspberry Pis & SD Cards with pre-configured software Pre-configured WiFi Router for ease of Ethernet connectivity

    Plug and Play kit for classroom, just add your LEGO parts and start using in your classroom! Includes 3 PiStorms Kits, including Raspberry Pis & SD Cards...

  • $4.95
    $4.95

    Case for Raspberry Pi 3

    Case for Raspberry Pi 3

  • $109.00
    $109.00

    PiStorms-GRX Base Kit contains PiStorms-GRX Controller PiStorms Frame and mounting hardware 6AA Battery box Stylus NEW

    PiStorms-GRX Base Kit contains PiStorms-GRX Controller PiStorms Frame and mounting hardware 6AA Battery box Stylus NEW

  • $168.00
    $168.00

    PiStorms-GRX Robotics Kit contains PiStorms-GRX Controller PiStorms Frame and mounting hardware 6AA Battery box Stylus 2 Continuous Rotation Servos with mountings 2 Encoders with cables Marble Caster 2 Wheels with tires Grove Light Sensor 2 Grove Touch Sensors

    PiStorms-GRX Robotics Kit contains PiStorms-GRX Controller PiStorms Frame and mounting hardware 6AA Battery box Stylus 2 Continuous Rotation Servos with...

Favorite Video

Poll

  • What do you use to program your FRC Robot?
    Total: