Mounting Pi-Pan Assembly on Target

If you are mounting Pi-Pan Assembly on Pi-Case directly

Servo horn to useAffix adjacent servo horn directly on the case, and mount the head assembly over it (attach servo screws from bottom).

If you are mounting Pi-Pan Assembly else where

Spacers to useUse two of adjacent spacers, peel off the glue cover sheet to affix on mount plate.

affix sapcersAffix the spacers on the mount plate as shown in adjacent picture and press firmly.

servo hornAffix servo horn as shown (with screws from bottom)

spacingSpacing on this plate is as seen in adjacent picture: (hole size 3/16”)
Use this spacing to make holes on your target mount plate.

Completed assemblyCompleted assembly, ready to mount on your target plate.