Menu
Obstacle Detectors & Navigational Aids for Mindstorms NXT and EV3.
Suitable for obstacle detection at two distance ranges Detect obstacles in front-left, front-right or straight ahead. Simple to use interface.
Suitable for obstacle detection at two distance ranges Detect obstacles in front-left, front-right or straight ahead. Simple to use interface.
This device combines Acceleration Sensor, Compass and 3-axis digital Gyro in single package. It is configurable to different sensitivity levels of gravity, help you determine tilt, acceleration, magnetic heading and Gyro values in various intensities and 3 axes.
This device combines Acceleration Sensor, Compass and 3-axis digital Gyro in single package. It is configurable to different sensitivity levels of gravity,...
Connect Grove Sensors to your EV3 or NXT.
Connect Grove Sensors to your EV3 or NXT.
This kit is designed to mount a Grove Sensor on NXT/EV3 Robot.
This kit is designed to mount a Grove Sensor on NXT/EV3 Robot.
Measure current of your electronic device. Upto: 12.5 amps Resolution: 1 milli-amps
Measure current of your electronic device. Upto: 12.5 amps Resolution: 1 milli-amps
Measure voltage of your electronic device. Upto: 26 volts Resolution: 1 milli-volt
Measure voltage of your electronic device. Upto: 26 volts Resolution: 1 milli-volt
Use this sensor to detect a line. Array of 8 sensors Digital I2C interface for NXT/EV3 Write your own PID controller or line follower programs
Use this sensor to detect a line. Array of 8 sensors Digital I2C interface for NXT/EV3 Write your own PID controller or line follower programs
This is an array of 8 sensors with controlled light source, returning you 8 discrete values of the sensor readings. Your program can then decide if you wish to follow line with it or do something else.
This is an array of 8 sensors with controlled light source, returning you 8 discrete values of the sensor readings. Your program can then decide if you wish...
You can use this device to send Numeric input to your NXT program. Digital Sensor Interface Attach to Sensor Port on NXT Input 0 to 9, # and *
You can use this device to send Numeric input to your NXT program. Digital Sensor Interface Attach to Sensor Port on NXT Input 0 to 9, # and *
Uses Digital Interface High resolution readings in millimeters Range: 10cm to 80cm
Uses Digital Interface High resolution readings in millimeters Range: 10cm to 80cm
This sensor measures pressures produced by LEGO Pneumatics systems and lot more!Pressure range: 0 to 58 PSI Measure Absolute Pressure, Relative pressure (change in pressure) Works with NXT-G, RobotC, BricxXX/NXC. Also, works with Data Logging Tool of NXT-G Edu version.
This sensor measures pressures produced by LEGO Pneumatics systems and lot more!Pressure range: 0 to 58 PSI Measure Absolute Pressure, Relative pressure...
Easy-to-use design. Provides readings in degrees.
Easy-to-use design. Provides readings in degrees.
Measure ambient temperature as well as temperature of surrounding devices. Non-contact Resolution: 0.1 degrees Returns values in Celcius and Fahrenheit EV3/NXT Compatible Connector Programming blocks available for EV3 or NXT
Measure ambient temperature as well as temperature of surrounding devices. Non-contact Resolution: 0.1 degrees Returns values in Celcius and Fahrenheit...
Uses Digital Interface High resolution readings in millimeters Range: 3cm to 200cm 100% backward compatible (Works seamlessly with previous Dist-Nx models software and programs).
Uses Digital Interface High resolution readings in millimeters Range: 3cm to 200cm 100% backward compatible (Works seamlessly with previous Dist-Nx models...